 |
 |
 » » bbevren | Hi All,
Im newbie at pano thing. I have sigma 10-20mm/nikon d300 with home made custom pano tripod head.
Software just stitches 3-4 images not all.
My degrees are wrong? should i take horizantal instead of vertical ? how many shoots i need with what degrees
Im adding a reference image, thats what im shooting
i am also adding up and down shots which not included below
Thank you |
timefx | Dear bbevren,
if you put the single source images on an ftp for download, I'll give it a try...
Or send me a *.rar or *.zip file to tim.mendler@panographers.net
Best regards
Tim
|
timefx | OK bbevren, I've downloded them.
I'll keep you posted...
Best regards
Tim |
timefx | Dear bbevren,
I uploaded a SU562.rzs-file, a low-res sperical.jpg and QTVR.mov render here:
http://www.panographers.net/ForumREALVIZ/bbevren/
After I loaded the source images, I did a calculation for heavy distortion (or "strong"? I use the french version, it says "Forte distortion" :-):
Select 2 images > Tools > Heavy Distortion > Calibrate
The other pano (room) has not enough overlapping... Sorry!
Best regards
Tim |
andrew_791 | Hi bbevren, I have downloaded them. I'll give it try. Hope i'll get it.
Goodluck! ---------------
Free TV
|
bbevren | Thanks for your time and consideration. I opened up the file you supported in Realviz and everything works great. When i try to do it from stratch i does not work. How do i calibrate? i throw to pics at stage,select one of them and i use calibrate function from the menu. |
timefx | Dera bbevren,
just select 2 images (Ctrl-click) in the strip on the bottom. Do not stitch them. Go to "Tools > Distortin > Calibrate".
I did the stadium by stitching every image one-by-one, not with auto-stitch all together...
Best regards
Tim |
bbevren | when selecting 2 images from strip,calibrate menu is not active (grayed out) its only active when i move two images to stage |
timefx | Sorry, you're right! That's the way to do it.
Tim |
» »
|
 |
 |
|
