How do you move a project .riz file to a different PC  where Image modeler may be installed on a completely different dive and directory?  I see that you need the .riz file and the image subdirectory.
 
Opening the .riz in notepad file I discovered that the directly is hard coded down to the drive letter.  Even if I changed that directory path Imagemodeler still did not open it.
 
Also there is a strange set of numbers at the end of that directory path what are they?
 
Thanks!!!!!!

Hello Sandy,
 
  If you move your project file to a different PC, you should move the following files keeping the same structure (locally):
- project.rzi (the main file)
- the images
- project_TX folder (textures)
 
Even if in the rzi files paths are described in a absolute way, IM will also check locally if the files are there.
 
Stef

Thank you Stef!!!!!!!!
 
We were doing the tutorial with the building and parking lot (with the imagex.jpg were in different directories.  Once I moved them to my working directory it all loaded fine.  I NEVER would have figured that out with out your help.  Many thanks
 
Sandy